ΜBITX
Notes on µBITX assembly and use.
Assembly
Parts that took some time to decide on approach to:
- Case: used a cookie tin from Goodwill for $3 as a case.
- Mic assembly: TODO
Antenna setup
Inverted V dipole made with Amateur Radio Supplies 20m dipole antenna wire (two 18' strands, trimmed, wrapped around insulators, strung up in attic) and 450Ω window line.
- Originally was sent two 16ft strands, which is really too short. Customer service was great and sent me the 18ft strands and a prepaid return envelope for the 16ft strands.
QRPGuys Multi Z Tuner
QRPGuys 12W dummy load
- Items from QRPGuys took about 2 weeks from date of order to arrive.
Mods
Fuse before diode
Applied during assembly.
Have blown the fuse twice (first time forget, second time transmitting on 40m with untuned antenna), so it seems to work.
Mitigating heat on LM7805
I started by adding a small 5V switching power supply before LM7805. This created a ton of noise on RX, so I took it out.
Instead, I relocated LM7805 to case. The first time I got the leads switched, though, and smoked the nano.
Dim the LCD
At first it had no effect, but then found I hadn't cut the trace between the two leads first, which I did 2018-09-06.
CEC firmware
After getting some extra nanos, I flashed one with CEC firmware. Works great!
TX LED
Soldered it up red LED per BITX20 message 46853 on 2018-09-06. Works great!
Other things on wish list
- SWR meter
- Red-on-black display (for night-time operation)
- Foot-pedal controlled TX
- Some sort of audio pre-processing?
- Leveling out power?
- Fix filters??
